Daniel Duke

0000-0001-8692-6493

Senior Lecturer (Aerospace engineering not elsewhere classified; Mechanical engineering not elsewhere classified; Agricultural biotechnology not elsewhere classified)

Clayton, VIC, Australia

Dr Daniel Duke is a Senior Lecturer in the Department of Mechanical & Aerospace Engineering at Monash University, Australia. He holds a Bachelor of Engineering and Aerospace Technology (2008) from Monash University, and a PhD in Engineering from Monash (2015). He is a Fulbright fellow (2011) and Australian Research Council Discovery Early Career Researcher Award recipient (2017). Dr. Duke’s area of expertise is the fluid mechanics of aerosols and sprays, with a particular focus on pressurised metered dose inhalers. Prior to his appointment to Monash, he worked as a postdoctoral appointee at Argonne National Laboratory (Illinois, USA). Dr. Duke’s current research interests span both experimental and simulation-based approaches to complex multi-phase, multi-component fluid flows.

Publications

A study on the relationship between internal nozzle geometry and injected mass distribution of eight ECN Spray G nozzles.
Time-resolved X-ray Tomography of Gasoline Direct Injection Sprays
X-ray Diagnostics for Cavitating Nozzle Flow
X-ray radiography of cavitation in a beryllium alloy nozzle
X-Ray Radiography Measurements of the Thermal Energy in Spark Ignition Plasma at Variable Ambient Conditions
Time-resolved X-ray radiography of sprays from engine combustion network spray a diesel injectors
X-ray Imaging of Cavitation in Diesel Injectors
A Novel High-Speed Imaging Technique to Predict the Macroscopic Spray Characteristics of Solution Based Pressurised Metered Dose Inhalers
Hard X-ray fluorescence spectroscopy of high pressure cavitating fluids in aluminum nozzles
String flash-boiling in gasoline direct injection simulations with transient needle motion
X-ray Imaging of Cavitation in Diesel Injectors
High Resolution X-ray Tomography of Injection Nozzles
Linking instantaneous rate of injection to X-ray needle lift measurements for a direct-acting piezoelectric injector
Temporally and Spatially Resolved x-ray Fluorescence Measurements of in-situ Drug Concentration in Metered-Dose Inhaler Sprays
Effects of noncondensable gas on cavitating nozzles
Internal and near nozzle measurements of Engine Combustion Network “Spray G” gasoline direct injectors
High-Resolution X-Ray and Neutron Computed Tomography of an Engine Combustion Network Spray G Gasoline Injector
Measurements of droplet size in shear-driven atomization using ultra-small angle x-ray scattering
Time-resolved X-ray radiography of sprays from Engine Combustion Network spray a diesel injectors
Spray flow structure from twin-hole diesel injector nozzles
A novel high-speed imaging technique to predict the macroscopic spray characteristics of solution based pressurised metered dose inhalers
LES of Diesel and Gasoline Sprays with Validation against X-Ray Radiography Data
Common rail diesel sprays from twin-hole nozzle
Revealing pMDI Spray Initial Conditions
An Examination of Spray Stochastics in Single-Hole Diesel Injectors
Quantification of Shot-to-Shot Variation in Single Hole Diesel Injectors
Numerical investigation of liquid jet breakup and droplet statistics with comparison to X-ray radiography
Recent Developments in X-ray Diagnostics for Cavitation
The growth of instabilities in annular liquid sheets
String Flash-Boiling in Flashing and Non-Flashing Gasoline Direct Injection Simulations with Transient Needle Motion
Time-Resolved X-Ray Radiography of Spark Ignition Plasma
A review of synchrotron radiation diagnostics for fluid mechanics
Computational and Experimental Investigation of Interfacial Area in Near-Field Diesel Spray Simulation
Measuring shear layer growth rates in aeroacoustically forced axisymmetric supersonic jets
Insights into Spray Development from Metered-Dose Inhalers Through Quantitative X-ray Radiography
X-ray radiography measurements and numerical simulations of cavitation in a metal nozzle
Pressurised metered-dose inhaler spray structure
Experimental and Computational Investigation of Subcritical Near-Nozzle Spray Structure and Primary Atomization in the Engine Combustion Network Spray D
An experimental investigation of gas fuel injection with X-ray radiography
CFD and X-Ray Analysis of Gaseous Direct Injection from an Outward Opening Injector
Acoustic unsteadiness of sprays from pressurised metered-dose inhalers
X-Ray Radiography and CFD Studies of the Spray G Injector
Time-Resolved X-ray Radiography of Cavitation in a Metal Nozzle
X-ray fluorescence measurements of dissolved gas and cavitation
Back-illumination imaging of pressurised metered-dose inhaler sprays
High-resolution X-ray tomography of Engine Combustion Network diesel injectors
A low-cost high-speed CMOS camera for scientific imaging
Effect of turbulence on drop breakup in counter air flow
Waves in screeching jets
A computational fluid dynamics assessment of 3D printed ventilator splitters and restrictors for differential multi-patient ventilation
Development of diagnostic techniques for the investigation of instabilities in annular liquid sheets
Empirical and theoretical analysis of the stability of an air-assisted atomising annular liquid sheet spray systems
Use of zero-net-mass-flow for separation control in diffusing S-duct
An error analysis of the dynamic mode decomposition
X-Ray Radiography Measurements of Cavitating Nozzle Flow
Nonlinear instabilities and Koopman Modes in axisymmetric multiphase shear flows
Measuring Cavitation with Synchrotron X-Rays
Empirical and theoretical analysis of the stability of an air-assisted atomising annular liquid sheet spray systems
Use of zero-net-mass-flow for separation control in diffusing S-duct
End of Injection, Mass Expulsion Behaviors in Single Hole Diesel Fuel Injectors
Experimental Analysis of the Instability and Breakup of an Annular Liquid Sheet with Axial Co-flow
A cross-correlation velocimetry technique for breakup of an annular liquid sheet
Empirical and theoretical analysis of the stability of an air-assisted atomising annular liquid sheet
A comparison of subpixel edge detection and correlation algorithms for the measurement of sprays
Comparing Simulations and X-ray Measurements of a Cavitating Nozzle
Empirical Scaling Analysis of Atomising Annular Liquid Sheets
Time-Resolved X-Ray Radiography of Diesel Injectors from the Engine Combustion Network
Investigation of wall-bounded turbulent flow using dynamic mode decomposition
High-resolution large eddy simulations of cavitating gasoline--ethanol blends
Synchrotron X-Ray Measurements of Cavitation
Measurements of diesel spray droplet size with ultra-small angle X-ray scattering
Experimental investigation of nonlinear instabilities in annular liquid sheets
A PIV-Based Approach to the Stability Analysis of Multiphase Flows
Experimental investigation of nonlinear instabilities in annular liquid sheets
X-ray radiography measurements of cavitating nozzle flow
A comparison of subpixel edge detection and correlation algorithms for the measurement of sprays
A cross-correlation velocimetry technique for breakup of an annular liquid sheet
An error analysis of the dynamic mode decomposition
High-resolution large eddy simulations of cavitating gasoline-ethanol blends
Investigation of wall-bounded turbulent flow using Dynamic mode decomposition
Flow control in S-Shaped air intake using zero-net-mass-flow
Volatile propellant droplet evaporation measurements in metered dose inhaler sprays
Canister valve and actuator deposition in metered dose inhalers formulated with low-GWP propellants

Daniel Duke

Publications

Usage metrics

Daniel Duke's public data